Deturner - The Only Coating

Deturner The Only Coating

is a high-quality ceramic sealer for painted surfaces that is intended for both amateur and professional use. It is characterized by a simple application similar to Quick Detailers, which is why it is particularly recommended for beginners. It can also be applied as a topcoat over other sealers.

It creates a surface that is resistant to weathering, including micro-scratches and UV radiation, which can damage the color of the paint. It is resistant to aggressive chemicals, including diluted acids and bases.

After application, it provides a crystalline, glassy, slippery effect and a significant darkening of the paint and smoothness. The resulting self-cleaning and phenomenal water-repellent effect lasts up to 12 months or 20,000 km / 50 car washes.

Features

- Chemical resistant between 2 - 12 pH
- Can be used on the following surfaces: Paint, reflectors, plastics, protective films
- Duration of protection: up to 12 months / 20,000 km / 50 car washes
- Economical: 20 - 30 ml are sufficient for a medium-sized car
- Single coat application, no second coat required
- Adheres to the surface after just 24 hours
- Fills micro-scratches in the car paint well
- Possibility to apply the coating on the outside

Instructions for use

- The paint surface must be washed, all dirt removed and polished if necessary. Mechanical or chemical decontamination and a one-step paint correction are recommended.
- Degrease the surface, preferably twice.
- The sealant can also be applied outdoors, avoiding excessive exposure to sunlight.
- The ideal working conditions are temperatures in the range of 15 - 25°C.

1.) Shake the bottle vigorously. Only work in good lighting and on cool paint.
2.) Apply approx. 10 - 15 drops to the applicator block / pad.
3.) Spread thinly and evenly crosswise in small sections (approx. 50 x 50 cm).
4.) Allow to flash off for approx. 5 minutes depending on the temperature (faster with heat!).
5.) Remove residues with a thick microfiber cloth (high grammage).
6.) Polish to a high gloss with a fine cloth.

Note

- The sealant will harden completely within 14 days of application. It is important that the sealant does not become excessively dirty, especially on the lower parts of the door - it will then lose its water-repellent properties. If this is the case, it is better to wash the car with a neutral shampoo than to leave the dirt on the surface.
- Do not use on surfaces such as glass, rubber, vinyl, fabric or leather
- Remove excess sealant within the time specified in the instructions.
- Use personal protective equipment, including gloves and mask
- Do not use on hot elements or in direct sunlight
- Never apply to the entire surface of the vehicle, but area by area.
- The protected surface must not come into contact with water or moisture for 24 hours after application.
- Store the sealant at a temperature of 10 - 25°C.
- Use within 7 days after opening.
- Shake bottle well before each use.