Liquid Elements - Masking Tape Box (19mm x 50m)

Liquid Elements 3x Klebeband 19mm x 50m Masking Tape Box

is a masking tape from Liquid Elements in a practical storage box. The masking tape can be used for sensitive surfaces to protect them during vehicle preparation. It can be used on every conceivable surface such as plastic, rubber, foil, glass and, of course, paint. Adhesion is guaranteed on all surfaces, as is removal without leaving any residue. The Liquid Elements adhesive tape also has a high positive stretching capacity, which means it can be perfectly placed around corners and edges. Due to its high resistance to water and solvents, Liquid Elements Masking Tape can be used for almost all processing work.

Features

- Dimension: 19mm x 50m
- Temperature resistant up to max 60°C
- Tensile strength: >60N / 25mm
- Total thickness: 145 µ +/- 5 µ
- Applicable on all surfaces
- Waterproof and solvent resistant
- Residue-free removal

Instructions for use

1.) Clean and dry the surface to be covered
2.) Pull out the adhesive tape to the desired length, stick it on and press it on.
3.) After preparation / polishing, remove the adhesive tape.

Note

- Always mask all plastic surfaces and rubber parts very carefully before polishing!
- Fold down corners and edges or, if present, press them into the pallet.