Liquid Elements - Scatter applicator for ceramic sealants

Liquid Elements Scatter applicator for ceramic sealants

Scatter is the perfect helper for the wafer-thin application of ceramic coatings such as Liquid Elements Eco Shield and Base Coat 9H.

The Scatter application cloths are made of a high-quality microfiber consisting of a single sheet of fabric that is intertwined in straight strips and then pressed together. This process creates a flat and hard-wearing microfiber that forms a very fine and soft surface and is therefore suitable for delicate work.

The scatter microfiber cloth is placed on the black underside of the Liquid Elements applicator block and overlaid on the top of the block to ensure a perfect hold for applying a ceramic coating with the scatter. The ceramic coating should be applied with the scatter in a crosswise motion (from top to bottom, from left to right). After successfully using the scatter application cloths, they should be disposed of and not used again.

Properties

- Applicator for ceramic coatings
- Can be used on paint, glass, film, plastic
- Very gentle
- Size: 8 x 12 cm
- Weight: 200 GSM
- Edge: Ultrasonic wave-cut microfiber edge
- Fiber type: Premium microfiber

How to use

1.) Wring out the cloth
2.) Place the cloth around an applicator
3.) Apply the ceramic coating to the cloth
4.) Coat the surface in a cross-coat process

Note

- The scatter cloth should be replaced regularly during use depending on the degree of soiling. Approx. 1 - 4 cloths are required for 1 layer of ceramic for a complete vehicle.

- Do not continue to use microfiber cloths if they are soiled / contaminated, for example if they have accidentally come into contact with the floor during application.

Scope of delivery

- 10 x Liquid Elements Scatter Applicator for ceramic coatings in a practical storage box

Material composition

- 80% polyester
- 20% polyamide