Soft99 - Glaco DX (110ml)

Soft99 Glaco DX (110ml)

Glaco DX is the latest generation of Glaco windscreen sealant, featuring extreme water repellency, easy handling and ergonomic operation. All this to provide you with the highest level of driving safety in the rain and comfort in everyday driving in an even simpler way. Glaco DX uses the newly developed SARF (Strong Adhesion + Rapid Finish) technology, thanks to which the time needed to bond the product to the glass has been reduced to just 5 minutes, polishing the residue has become fabulously easy and the strength of the bond guarantees a durability of up to 4 months.

In addition, the coating creates an ultra-smooth film that repels water from the glass with unparalleled power and speed. The packaging with integrated applicator is a trademark of the Glaco range, but in the case of Glaco DX, the applicator is an evolution of this valued solution. A new feature is the movable applicator head, which adapts to the angle of the windscreen, making the work easier and faster, regardless of the type of vehicle, the windscreen or the position of the adjacent elements, such as the side mirrors.

The shape of the applicator's working part has also been modified so that the corners of the windscreen can be easily reached and the entire surface can be precisely covered. Thanks to its properties, Glaco DX is not only useful on rainy days. In the winter season, it reduces the adhesion of frost, ice and snow and protects the windows from dirt during the entire period of operation, making daily maintenance easier.

Instructions for use

1.) Before use, wash the car thoroughly and clean the windows with a special product - Glaco Compound Roll On or Compound Z.
2.) Remove the cap of the applicator, place it on the glass and squeeze the bottle lightly so that the felt part of the applicator gets full.
3.) Apply the product evenly in criss-crossing movements by pressing the applicator lightly on the dry glass surface.
4.) Allow the product to dry for approx. 5-10 minutes and then wipe off any remaining residue with a slightly damp microfibre cloth.
5.) Remove any residue with a dry and clean microfibre cloth until the glass is completely clear. After application, make sure the glass is completely clear and free of residue. Incomplete removal may result in a bouncing wiper effect.